module Cinch
  # Used to indicate the nickname parameter supplied to a command is
  # currently unused.
  ERR_NOSUCHNICK = 401

  # Used to indicate the server name given currently doesn't exist.
  ERR_NOSUCHSERVER = 402

  # Used to indicate the given channel name is invalid.
  ERR_NOSUCHCHANNEL = 403

  # Sent to a user who is either
  #  - not on a channel which is mode +n
  #  - not a chanop (or mode +v) on a channel which has mode +m set
  #    and is trying to send a PRIVMSG message to that channel.
  ERR_CANNOTSENDTOCHAN = 404

  # Sent to a user when they have joined the maximum number of allowed
  # channels and they try to join another channel.
  ERR_TOOMANYCHANNELS = 405

  # Returned by WHOWAS to indicate there is no history information for
  # that nickname.
  ERR_WASNOSUCHNICK = 406

  # Returned to a client which is attempting to send PRIVMSG/NOTICE
  # using the user@host destination format and for a user@host which has
  # several occurrences.
  ERR_TOOMANYTARGETS = 407

  # PING or PONG message missing the originator parameter which is
  # required since these commands must work without valid prefixes.
  ERR_NOORIGIN     = 409
  ERR_NORECIPIENT  = 411
  ERR_NOTEXTTOSEND = 412
  ERR_NOTOPLEVEL   = 413

  # 412 - 414 are returned by PRIVMSG to indicate that the message
  # wasn't delivered for some reason. ERR_NOTOPLEVEL and
  # ERR_WILDTOPLEVEL are errors that are returned when an invalid use of
  # "PRIVMSG $<server>" or "PRIVMSG #<host>" is attempted.
  ERR_WILDTOPLEVEL = 414

  # Returned to a registered client to indicate that the command sent is
  # unknown by the server.
  ERR_UNKNOWNCOMMAND = 421

  # Server's MOTD file could not be opened by the server.
  ERR_NOMOTD = 422

  # Returned by a server in response to an ADMIN message when there is
  # an error in finding the appropriate information.
  ERR_NOADMININFO = 423

  # Generic error message used to report a failed file operation during
  # the processing of a message.
  ERR_FILEERROR = 424

  # Returned when a nickname parameter expected for a command and isn't
  # found.
  ERR_NONICKNAMEGIVEN = 431

  # Returned after receiving a NICK message which contains characters
  # which do not fall in the defined set.
  ERR_ERRONEUSNICKNAME = 432

  # Returned when a NICK message is processed that results in an attempt
  # to change to a currently existing nickname.
  ERR_NICKNAMEINUSE = 433

  # Returned by a server to a client when it detects a nickname
  # collision (registered of a NICK that already exists by another
  # server).
  ERR_NICKCOLLISION = 436

  # Returned by the server to indicate that the target user of the
  # command is not on the given channel.
  ERR_USERNOTINCHANNEL = 441

  # Returned by the server whenever a client tries to perform a channel
  # effecting command for which the client isn't a member.
  ERR_NOTONCHANNEL = 442

  # Returned when a client tries to invite a user to a channel they are
  # already on.
  ERR_USERONCHANNEL = 443

  # Returned by the summon after a SUMMON command for a user was unable
  # to be performed since they were not logged in.
  ERR_NOLOGIN = 444

  # Returned as a response to the SUMMON command. Must be returned by
  # any server which does not implement it.
  ERR_SUMMONDISABLED = 445

  # Returned as a response to the USERS command. Must be returned by any
  # server which does not implement it.
  ERR_USERSDISABLED = 446

  # Returned by the server to indicate that the client must be
  # registered before the server will allow it to be parsed in detail.
  ERR_NOTREGISTERED = 451

  # Returned by the server by numerous commands to indicate to the
  # client that it didn't supply enough parameters.
  ERR_NEEDMOREPARAMS = 461

  # Returned by the server to any link which tries to change part of the
  # registered details (such as password or user details from second
  # USER message).
  ERR_ALREADYREGISTRED = 462

  # Returned to a client which attempts to register with a server which
  # does not been setup to allow connections from the host the attempted
  # connection is tried.
  ERR_NOPERMFORHOST = 463

  # Returned to indicate a failed attempt at registering a connection
  # for which a password was required and was either not given or
  # incorrect.
  ERR_PASSWDMISMATCH = 464

  # Returned after an attempt to connect and register yourself with a
  # server which has been setup to explicitly deny connections to you.
  ERR_YOUREBANNEDCREEP = 465
  ERR_KEYSET           = 467
  ERR_CHANNELISFULL    = 471
  ERR_UNKNOWNMODE      = 472
  ERR_INVITEONLYCHAN   = 473
  ERR_BANNEDFROMCHAN   = 474
  ERR_BADCHANNELKEY    = 475

  # Any command requiring operator privileges to operate must return
  # this error to indicate the attempt was unsuccessful.
  ERR_NOPRIVILEGES = 481

  # Any command requiring 'chanop' privileges (such as MODE messages)
  # must return this error if the client making the attempt is not a
  # chanop on the specified channel.
  ERR_CHANOPRIVSNEEDED = 482

  # Any attempts to use the KILL command on a server are to be refused
  # and this error returned directly to the client.
  ERR_CANTKILLSERVER = 483

  # If a client sends an OPER message and the server has not been
  # configured to allow connections from the client's host as an
  # operator, this error must be returned.
  ERR_NOOPERHOST = 491

  # Returned by the server to indicate that a MODE message was sent with
  # a nickname parameter and that the a mode flag sent was not
  # recognized.
  ERR_UMODEUNKNOWNFLAG = 501

  # Error sent to any user trying to view or change the user mode for a
  # user other than themselves.
  ERR_USERSDONTMATCH = 502
  RPL_NONE           = 300

  # Reply format used by USERHOST to list replies to the query list.
  RPL_USERHOST = 302

  # Reply format used by ISON to list replies to the query list.
  RPL_ISON = 303

  # RPL_AWAY is sent to any client sending a PRIVMSG to a client which
  # is away. RPL_AWAY is only sent by the server to which the client is
  # connected.
  RPL_AWAY = 301

  # Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the client removes
  # and sets an AWAY message
  RPL_UNAWAY = 305

  # Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the client removes
  # and sets an AWAY message
  RPL_NOWAWAY       = 306
  RPL_WHOISUSER     = 311
  RPL_WHOISSERVER   = 312
  RPL_WHOISOPERATOR = 313
  RPL_WHOISIDLE     = 317
  RPL_ENDOFWHOIS    = 318

  # Replies 311 - 313, 317 - 319 are all replies generated in response
  # to a WHOIS message. Given that there are enough parameters present,
  # the answering server must either formulate a reply out of the above
  # numerics (if the query nick is found) or return an error reply. The
  # '*' in RPL_WHOISUSER is there as the literal character and not as a
  # wild card. For each reply set, only RPL_WHOISCHANNELS may appear
  # more than once (for long lists of channel names). The '@' and '+'
  # characters next to the channel name indicate whether a client is a
  # channel operator or has been granted permission to speak on a
  # moderated channel. The RPL_ENDOFWHOIS reply is used to mark the end
  # of processing a WHOIS message.
  RPL_WHOISCHANNELS = 319
  RPL_WHOWASUSER    = 314

  # When replying to a WHOWAS message, a server must use the replies
  # RPL_WHOWASUSER, RPL_WHOISSERVER or ERR_WASNOSUCHNICK for each
  # nickname in the presented list. At the end of all reply batches,
  # there must be RPL_ENDOFWHOWAS (even if there was only one reply and
  # it was an error).
  RPL_ENDOFWHOWAS = 369
  RPL_LISTSTART   = 321
  RPL_LIST        = 322

  # Replies RPL_LISTSTART, RPL_LIST, RPL_LISTEND mark the start, actual
  # replies with data and end of the server's response to a LIST
  # command. If there are no channels available to return, only the
  # start and end reply must be sent.
  RPL_LISTEND       = 323
  RPL_CHANNELMODEIS = 324
  RPL_NOTOPIC       = 331

  # When sending a TOPIC message to determine the channel topic, one of
  # two replies is sent. If the topic is set, RPL_TOPIC is sent back
  # else RPL_NOTOPIC.
  RPL_TOPIC = 332

  # Returned by the server to indicate that the attempted INVITE message
  # was successful and is being passed onto the end client.
  RPL_INVITING = 341

  # Returned by a server answering a SUMMON message to indicate that it
  # is summoning that user.
  RPL_SUMMONING = 342

  # Reply by the server showing its version details. The <version>
  # is the version of the software being used (including any patchlevel
  # revisions) and the <debuglevel> is used to indicate if the
  # server is running in "debug mode".
  #
  #The "comments" field may contain any comments about the version or
  # further version details.
  RPL_VERSION  = 351
  RPL_WHOREPLY = 352

  # The RPL_WHOREPLY and RPL_ENDOFWHO pair are used to answer a WHO
  # message. The RPL_WHOREPLY is only sent if there is an appropriate
  # match to the WHO query. If there is a list of parameters supplied
  # with a WHO message, a RPL_ENDOFWHO must be sent after processing
  # each list item with <name> being the item.
  RPL_ENDOFWHO  = 315
  RPL_NAMREPLY  = 353
  RPL_NAMEREPLY = RPL_NAMREPLY

  # To reply to a NAMES message, a reply pair consisting of RPL_NAMREPLY
  # and RPL_ENDOFNAMES is sent by the server back to the client. If
  # there is no channel found as in the query, then only RPL_ENDOFNAMES
  # is returned. The exception to this is when a NAMES message is sent
  # with no parameters and all visible channels and contents are sent
  # back in a series of RPL_NAMEREPLY messages with a RPL_ENDOFNAMES to
  # mark the end.
  RPL_ENDOFNAMES = 366
  RPL_LINKS      = 364

  # In replying to the LINKS message, a server must send replies back
  # using the RPL_LINKS numeric and mark the end of the list using an
  # RPL_ENDOFLINKS reply.
  RPL_ENDOFLINKS = 365
  RPL_BANLIST    = 367

  # When listing the active 'bans' for a given channel, a server is
  # required to send the list back using the RPL_BANLIST and
  # RPL_ENDOFBANLIST messages. A separate RPL_BANLIST is sent for each
  # active banid. After the banids have been listed (or if none present)
  # a RPL_ENDOFBANLIST must be sent.
  RPL_ENDOFBANLIST = 368
  RPL_INFO         = 371

  # A server responding to an INFO message is required to send all its
  # 'info' in a series of RPL_INFO messages with a RPL_ENDOFINFO reply
  # to indicate the end of the replies.
  RPL_ENDOFINFO = 374
  RPL_MOTDSTART = 375
  RPL_MOTD      = 372

  # When responding to the MOTD message and the MOTD file is found, the
  # file is displayed line by line, with each line no longer than 80
  # characters, using RPL_MOTD format replies. These should be
  # surrounded by a RPL_MOTDSTART (before the RPL_MOTDs) and an
  # RPL_ENDOFMOTD (after).
  RPL_ENDOFMOTD = 376

  # RPL_YOUREOPER is sent back to a client which has just successfully
  # issued an OPER message and gained operator status.
  RPL_YOUREOPER = 381

  # If the REHASH option is used and an operator sends a REHASH message,
  # an RPL_REHASHING is sent back to the operator.
  RPL_REHASHING = 382

  # When replying to the TIME message, a server must send the reply
  # using the RPL_TIME format above. The string showing the time need
  # only contain the correct day and time there. There is no further
  # requirement for the time string.
  RPL_TIME       = 391
  RPL_USERSSTART = 392
  RPL_USERS      = 393
  RPL_ENDOFUSERS = 394

  # If the USERS message is handled by a server, the replies
  # RPL_USERSTART, RPL_USERS, RPL_ENDOFUSERS and RPL_NOUSERS are used.
  # RPL_USERSSTART must be sent first, following by either a sequence of
  # RPL_USERS or a single RPL_NOUSER. Following this is RPL_ENDOFUSERS.
  RPL_NOUSERS         = 395
  RPL_TRACELINK       = 200
  RPL_TRACECONNECTING = 201
  RPL_TRACEHANDSHAKE  = 202
  RPL_TRACEUNKNOWN    = 203
  RPL_TRACEOPERATOR   = 204
  RPL_TRACEUSER       = 205
  RPL_TRACESERVER     = 206
  RPL_TRACENEWTYPE    = 208

  # The RPL_TRACE* are all returned by the server in response to the
  # TRACE message. How many are returned is dependent on the the TRACE
  # message and whether it was sent by an operator or not. There is no
  # predefined order for which occurs first. Replies RPL_TRACEUNKNOWN,
  # RPL_TRACECONNECTING and RPL_TRACEHANDSHAKE are all used for
  # connections which have not been fully established and are either
  # unknown, still attempting to connect or in the process of completing
  # the 'server handshake'. RPL_TRACELINK is sent by any server which
  # handles a TRACE message and has to pass it on to another server. The
  # list of RPL_TRACELINKs sent in response to a TRACE command
  # traversing the IRC network should reflect the actual connectivity of
  # the servers themselves along that path. RPL_TRACENEWTYPE is to be
  # used for any connection which does not fit in the other categories
  # but is being displayed anyway.
  RPL_TRACELOG      = 261
  RPL_STATSLINKINFO = 211
  RPL_STATSCOMMANDS = 212
  RPL_STATSCLINE    = 213
  RPL_STATSNLINE    = 214
  RPL_STATSILINE    = 215
  RPL_STATSKLINE    = 216
  RPL_STATSYLINE    = 218
  RPL_ENDOFSTATS    = 219
  RPL_STATSLLINE    = 241
  RPL_STATSUPTIME   = 242
  RPL_STATSOLINE    = 243
  RPL_STATSHLINE    = 244

  # To answer a query about a client's own mode, RPL_UMODEIS is sent
  # back.
  RPL_UMODEIS       = 221
  RPL_LUSERCLIENT   = 251
  RPL_LUSEROP       = 252
  RPL_LUSERUNKNOWN  = 253
  RPL_LUSERCHANNELS = 254

  # In processing an LUSERS message, the server sends a set of replies
  # from RPL_LUSERCLIENT, RPL_LUSEROP, RPL_USERUNKNOWN,
  # RPL_LUSERCHANNELS and RPL_LUSERME. When replying, a server must send
  # back RPL_LUSERCLIENT and RPL_LUSERME. The other replies are only
  # sent back if a non-zero count is found for them.
  RPL_LUSERME   = 255
  RPL_ADMINME   = 256
  RPL_ADMINLOC1 = 257
  RPL_ADMINLOC2 = 258

  # When replying to an ADMIN message, a server is expected to use
  # replies RLP_ADMINME through to RPL_ADMINEMAIL and provide a text
  # message with each. For RPL_ADMINLOC1 a description of what city,
  # state and country the server is in is expected, followed by details
  # of the university and department (RPL_ADMINLOC2) and finally the
  # administrative contact for the server (an email address here is
  # required) in RPL_ADMINEMAIL.
  RPL_ADMINEMAIL = 259
end