Eggdrop Core Settings Last revised: May 24, 2002 _________________________________________________________________ Eggdrop Core Settings This file describes the syntax and all the settings of your Eggdrop configuration file. Please note that you don't need to set all of these variables to make your bot work properly. ##### EXECUTABLE PATH ##### The first line in an Eggdrop configuration file should contain a fully qualified path to your Eggdrop executable. It has to be implemented in the way the example shows to make the config file work as a shell script. Example: #! /path/to/eggdrop ##### BASIC STUFF ##### You can change the basic Eggdrop appearance and behavior in this section. set username "lamest" This setting defines the username the bot uses on IRC. This setting has no effect if an ident daemon is running on your bot's machine. set admin "Lamer " This setting defines which contact person should be shown in .status, /msg help, and other places. You really should include this information. set network "SomeIrcNetwork" This setting is used only for info to share with others on your botnet. Set this to the IRC network your bot is connected to. set timezone "EST" This setting defines the timezone is your bot in. It's used for internal routines as well as for logfile timestamping and scripting purposes. The timezone string specifies the name of the timezone and must be three or more alphabetic characters. For example, Central European Time(UTC+1) should be "CET". set offset "5" The offset setting specifies the time value to be added to the local time to get Coordinated Universal Time (UTC aka GMT). The offset is positive if the local timezone is west of the Prime Meridian and negative if it is east. The value (in hours) must be between -23 and 23. For example, if the timezone is UTC+1, the offset is -1. set env(TZ) "$timezone $offset" (disabled by default) If you don't want to use the timezone setting for scripting purposes only, but instead everywhere possible, then use this setting. set my-hostname "virtual.host.com" set my-ip "99.99.0.0" If you're using virtual hosting (your machine has more than 1 IP), you may want to specify the particular IP to bind to. You can specify either by hostname or by IP. You may also want to set the hostname here if Eggdrop has trouble detecting it when it starts up. addlang "english" If you want to have your Eggdrop messages displayed in another language, change this command to match your preferences. An alternative would be to set the environment variable EGG_LANG to that value. ##### LOG FILES ##### Eggdrop is capable of logging various things, from channel chatter to partyline commands and file transfers. Logfiles are normally kept for 24 hours. Afterwards, they will be renamed to "(logfilename).yesterday". After 48 hours, they will be overwritten by the logfile of the next day. set max-logs 5 This is the maximum number of logfiles allowed. This setting can be increased; however, don't decrease it. set max-logsize 0 This is the maximum size of your logfiles. Set it to 0 to disable. This value is in kilobytes, so '550' would mean cycle logs when it reaches the size of 550 kilobytes. Note that this only works if you have keep-all-logs set to 0 (OFF). set quick-logs 0 This could be good if you have had a problem with logfiles filling your quota/hard disk or if you log +p and publish it to the web, and you need more up-to-date info. Note that this setting might increase the CPU usage of your bot (on the other hand it will decrease your RAM usage). logfile "logs/logfile" This setting tells the bot what should be logged, from where, and to which file. The most common log file flags are: m private msgs/ctcps to the bot k kicks, bans, mode changes on the channel j joins, parts, netsplits on the channel p public chatter on the channel s server connects/disconnects/notices b information about bot linking and userfile sharing c commands people use (via msg or dcc) x file transfers and file-area commands r (if use-console-r enabled) EVERYTHING sent to the bot by the server o other: misc info, errors -- IMPORTANT STUFF w wallops: msgs between IRCops (be sure to set the bot +w in init-server) There are others, but you probably shouldn't log them, it'd be rather unethical ;). There are also eight user-defined levels (1-8) which are used by Tcl scripts. Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p' are logged to whatever channel they happened on. Most other events are currently logged to every channel. You can make a logfile belong to all channels by assigning it to channel "*". Examples: logfile mco * "logs/eggdrop.log" logfile jpk #lamest "logs/lamest.log" In 'eggdrop.log', put private msgs/ctcps, commands, misc info, and errors from any channel. In 'lamest.log', log all joins, parts, kicks, bans, public chatter, and mode changes from #lamest. set log-time 1 Use this feature to timestamp entries in the log file. set keep-all-logs 0 If you want to keep your logfiles forever, turn this setting on. All logfiles will get the suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]". Note that your quota/hard-disk might be filled by this, so check your logfiles often and download them. set switch-logfiles-at 300 You can specifiy when Eggdrop should switch logfiles and start fresh. use military time for this setting. 300 is the default, and describes 03:00 (AM). set quiet-save 0 Those nasty "Writing user file..." and "Writing channel file..." messages won't be logged anymore if this option is enabled. set logfile-suffix ".%d%b%Y" If keep-all-logs is 1, this setting will define the suffix of the logfiles. The default will result in a suffix like "04May2000". "%Y%m%d" will produce the often used yyyymmdd format. Read the strftime manpages for more options. NOTE: On systems which don't support strftime, the default format will be used _always_. ##### CONSOLE ##### set console "mkcobxs" This is the default console mode. It uses the same event flags as the log files do. The console channel is automatically set to your "primary" channel, which is set in the modules section of the config file. Masters can change their console channel and modes with the '.console' command. ##### FILES AND DIRECTORIES ##### set userfile "LamestBot.user" Specify here the filename your userfile should be saved as. set pidfile "pid.LamestBot" Specify here the filename Eggdrop will save its pid to. If no pidfile is specified, pid.(botnet-nick) will be used. set sort-users 0 If you want your userfile to be sorted upon saving, enable this setting. This causes the bot to use bit more CPU when saving the userfile. set help-path "help/" Specify here where Eggdrop should look for help files. Don't modify this setting unless you know what you're doing! set text-path "text/" Specify here where Eggdrop should look for text files. This is used for certain Tcl and DCC commands. set temp-path "/tmp" Set here a place to store temporary files. set motd "text/motd" The MOTD (Message Of The day) is displayed when people dcc chat or telnet to the bot. Look at doc/text-substitutions.doc for options. set telnet-banner "text/banner" This banner will be displayed on telnet connections. Look at doc/text-substitutions.doc for options. set userfile-perm 0600 This specifies what permissions the user, channel, and notes files should be set to. The octal values are the same as for the chmod system command. To remind you: u g o u g o u g o 0600 rw------- 0400 r-------- 0200 -w------- u - user 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others Note that the default 0600 is the most secure one and should only be changed if you need your files for shell scripting or other external applications. set mod-path "modules/" This path specifies the path were Eggdrop should look for its modules. If you run the bot from the compilation directory, you will want to set this to "". If you use 'make install' (like all good kiddies do ;), this is a fine default. Otherwise, use your head :). ##### BOTNET, DCC AND NETWORK ##### Settings in this section should be unimportant for you until you deal with botnets (multiple Eggdrops connected together to maximize efficiency). You should read doc/BOTNET before modifying these settings. set botnet-nick "LlamaBot" (disabled by default) If you want to use a different nickname on the botnet than you use on IRC (i.e. if you're on an un-trusted botnet), un-comment this line and set it to the nick you would like to use. listen The listen command opens a telnet port by which you or other bots can interact with the Eggdrop by telneting in. Valid ports are typically anything between 1025 and 65535 assuming the port is not already in use. Valid modes are 'all', 'bots', and 'users'. You can assign special ports for users and bots, or one for all. Examples: listen 3333 bots listen 4444 users Or: listen 3333 all There are more options for the listen command in doc/tcl-commands.doc. Note that if you are running more than one bot on the same machine, you will want to space the telnet ports at LEAST 5 apart. 10 is even better. set remote-boots 2 This setting defines whether or not people can boot users on the Eggdrop from other bots in your botnet. Valid settings are: 0 - allow *no* outside boots 1 - allow boots from sharebots 2 - allow any boots set share-unlinks 1 This setting prohibits Eggdrop to unlink from share bots if an remote bots tells so. set protect-telnet 0 This setting will drop telnet connections not matching a known host. It greatly improves protection from IRCops, but makes it impossible to add hosts on limbo (NOIRC) bots or have NEW as a valid login. set dcc-sanitycheck 0 This setting will make the bot ignore DCC chat requests which appear to have bogus information on the grounds that the user may have been trying to make the bot connect to somewhere that will get it into trouble, or that the user has a broken client (like mIRC tends to do), in which case the connect wouldn't work anyway. It's suggested that you turn this on. set ident-timeout 5 This settings defines a time in seconds that the bot should wait before a dcc chat, telnet, or relay connection times out. set require-p 0 Define here whether or not a +o user still needs the +p flag to dcc the bot. set open-telnets 0 If you want people allow to telnet in and type 'NEW' to become a new user, set this to 1. This is similar to the 'hello' msg command. The protect-telnet setting must be set to 0 to use this. set stealth-telnets 0 If you don't want Eggdrop to identify itself as an Eggdrop on a telnet connection, set this setting to 1. Eggdrop will display 'Nickname' instead. set use-telnet-banner 0 If you want Eggdrop to display a banner when telneting in, set this setting to 1. The telnet banner is set by 'set telnet-banner'. set connect-timeout 15 This settings defines a time in seconds that the bot should wait before a dcc chat, telnet, or relay connection times out. set dcc-flood-thr 3 Specify here the number of lines to accept from a user on the partyline within 10 seconds before they are considered to be flooding and therefore get booted. set telnet-flood 5:60 Define here how many telnet connection attempts in how many seconds from the same host constitute a flood. The correct format is Attempts:Seconds. set paranoid-telnet-flood 1 If you want telnet-flood to apply even to +f users, set this setting to 1. set resolve-timeout 15 Set here the amount of seconds before giving up on hostname/address lookup (you might want to increase this if you are on a slow network). ##### MORE ADVANCED SETTINGS ##### set firewall "!sun-barr.ebay:3666" Set this to your socks host if your Eggdrop sits behind a firewall. If you use a Sun "telnet passthru" firewall, prefix the host with a "!". set nat-ip "127.0.0.1" If you have a NAT firewall (you box has an IP in one of the following ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255, 10.0.0.0-10.255.255.255 and your firewall transparently changes your address to a unique address for your box) or you have IP masquerading between you and the rest of the world, and /dcc chat,/ctcp chat or userfile sharing aren't working, enter your outside IP here. Do not enter anything for my-ip or my-hostname if you use this setting. set reserved-portrange 2010:2020 If you want all dcc file transfers to use a particular portrange either because you're behind a firewall, or for other security reasons, set it here. set ignore-time 15 Set the time in minutes that temporary ignores should last. set hourly-updates 00 Define here what Eggdrop considers 'hourly'. All calls to it, including such things as note notifying or userfile saving, are affected by this. Example: set hourly-updates 15 The bot will save its userfile 15 minutes past every hour. set owner "MrLame, MrsLame" Un-comment this line and set the list of owners of the bot. You NEED to change this setting. set notify-newusers "$owner" Who should a note be sent to when new users are learned? set default-flags "hp" Enter the flags that all new users should get by default. See '.help whois' on the partyline for a list of flags and their descriptions. set whois-fields "url birthday" Enter all user-defined fields that should be displayed in a '.whois'. This will only be shown if the user has one of these extra fields. You might prefer to comment this out and use the userinfo1.0.tcl script which provides commands for changing all of these. set die-on-sighup 0 Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP kill signal. Otherwise, the Eggdrop will just save its userfile and rehash. set die-on-sigterm 0 Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM kill signal. Otherwise, the Eggdrop will just save its userfile and rehash. unbind dcc n tcl *dcc:tcl unbind dcc n set *dcc:set Comment these two lines if you wish to enable the .tcl and .set commands. If you select your owners wisely, you should be okay enabling these. set must-be-owner 1 If you enable this setting, only permanent owners (owner setting) will be able to use .tcl and .set. Moreover, if you want to only let permanent owners use .dump, then set this to 2. unbind dcc n simul *dcc:simul Comment out this line to add the 'simul' partyline command (owners can manipulate other people on the party line). Please select owners wisely and use this command ethically! set max-dcc 50 Set here the maximum number of dcc connections you will allow. You can increase this later, but never decrease it. set enable-simul 1 Enable this setting if you want to enable the 'dccsimul' Tcl command. set allow-dk-cmds 1 Enable this setting if you want +d & +k users to use commands bound as -|-. set dupwait-timeout 5 If your Eggdrop rejects bots that actually have already disconnected from another hub, but the disconnect information has not yet spread over the botnet due to lag, use this setting. The bot will wait dupwait-timeout seconds before it checks again and then finally reject the bot. ##### MODULES ##### After the core settings, you should start loading modules. Modules are loaded by the command "loadmodule ". Eggdrop looks for modules in the directory you specified by the module-path setting in the files and directories section. Please note that for different configurations, different modules are needed. Four examples: Channel Security Bot: This bot needs the channels, blowfish, console, dns, irc, and (if you like) ctcp modules loaded. More is not needed and makes the bot slower. Public IRC Bot: A public bot should have all modules available loaded since they provide all functions for everyday use. Secure Filesys Bot: This bot needs all normal IRC operating modules, but not the notes, seen, ctcp or share modules. Limbo Bot: A limbo bot (serves as a botnet hub outside IRC) just needs the channels, console, dns, and maybe notes or share modules loaded. Of course, blowfish needs to be loaded here, too. ##### SCRIPTS ##### The scripts section should be placed at the end of the config file. All modules should be loaded and their variables should be set at this point. source scripts/script.tcl This line loads script.tcl from the scripts directory inside your Eggdrop's directory. All scripts should be put there, although you can place them where you like as long as you can supply a fully qualified path to them. Some commonly loaded scripts are alltools.tcl and action.fix.tcl. The appropriate source lines are: source scripts/alltools.tcl source scripts/action.fix.tcl _________________________________________________________________ Copyright (C) 2000, 2001, 2002 Eggheads Development Team